Add Sub-Frame to Cabinet
This time we are showing you how to add a Sub-Frame to a cabinet which can be beneficial for vanities and other sink objects.
1) Using Face Frame construction, place a Base cabinet on a Wall and take it to the Assembly Editor \ Section View.
2) Right click on the Door and select Properties \ Sub-Frame and check the Add Sub-Frame box.
3) Fill in the value for the Recess amount and the Frame part sizes and click OK.
4) Now go to 3D view and you will see that you now have a Frame within a Frame.
5) The final image is an example of a shaped cabinet that could be hung on a Wall.
1) Using Face Frame construction, place a Base cabinet on a Wall and take it to the Assembly Editor \ Section View.
2) Right click on the Door and select Properties \ Sub-Frame and check the Add Sub-Frame box.
3) Fill in the value for the Recess amount and the Frame part sizes and click OK.
4) Now go to 3D view and you will see that you now have a Frame within a Frame.
5) The final image is an example of a shaped cabinet that could be hung on a Wall.
Explore Planit
CKCA Spring Regional Meeting
Southern - Ontario
6/12/12
Homag & Planit Monthly Event
Mississauga, ON
5/4/12 - 8/3/12
CKCA Fall Regional Meeting
Lethbridge, Alberta
9/25/12
Vero Hosts Largest Ever Reseller Conference
5/18/12
Radan 2012 Solution for Offline Press-Brake Programming
10/17/11
Aspire to Stunning CNC Carvings
8/4/11
